I installed a Zex nitrous kit part # 82034 and a Zex Traction Control Window Switch part # 82085 in my 2006 Mustang GT and the window switch is giving me problems.
I have the green tach signal wire from the window switch soldered to the green wire of the # 1 coil on plug. I set the # 1 in the switch to "00" as stated in the instructions. When I start the car and at idle, the display on the switch becomes erratic and starts flashing random numbers. Also at idle when it does this it turns the first gear lockout off so the nitrous can spray when 3000 rpm's are reached and I am hoping at wide open throttle.
I have spoken to 3 different techs at Zex, but I don't think they understood what I was describing is happening.
Here is a video I uploaded to youtube so you can see it for yourself, keep an eye on the lockout light and notice it goes off about half way through the video.
I hope there is a simple solution to this problem so I don't waste more time and $ shipping the switch back and forth if it is not defective.
Thanks in advance for any help you can provide.