- Solenoid opens too early
- 06 Mustang GT - solenoids open at 3.6 volts
- Plate differences
- Plate position
- Nitrous Nozzle Line Question
- Zex bottle warmer issue!
- Zex Wet Nitrous # 82021
- Nmu ?
- Hardline VS stainless flex
- WOT mirco switch question
- system 82012 and system 82023
- Lean issue
- Nos cutting in and out
- blackout parts- availability
- Nitrous pressure regulation
- ZEX jets
- using msd digital window switch with zex dry kit
- How to make a street legal California NOS
- Jacobs Electronics nitrous controller compatibility
- ZEX window switch skip shift
- Window switch
- What is the difference between dry kit 82011 and 82015 ?
- Loose Bolt on NMU
- ZEX jet ?
- Leaking noise @ NMU
- Nozzle in intake
- which ZEX tech is right
- zex 82180 nitrous regulator
- Fuel Pressure ?
- Torque converter for nitrous?
- DIfferance between MAP and MAF sensors, for ZEX DRY Nitrous?
- Nitrous Silenoid Jamed Closed
- Throttle Body Plate
- 100% Dissatisfied
- Just need some confirmation, max shot on stock fuel pump
- Installed Fuel PSI saftey switch, question
- Window switch challenger srt8
- where to buy zex jets?
- Zex- What the heck?
- Am I stupid?
- Is it true that the Zex NMU always makes the car run extremely rich?
- couple questions.
- Zex Help
- zex window switch
- Spark plug for Ford 460 stroker.
- Please help
- Bypass TPS function on NMU?
- Need Advice on Sparkplugs
- Install help...
- Use wet kit as Dry?
- Urgent response needed... Returned NMU
- NMU..Can I mount it upside down??
- 08 Mustang Bullitt plugs
- Bottle opener gears
- solenoid replacement
- Power Racer spark plugs?
- ZEX bottle question
- Zex Box light Blinking
- controler
- Perimeter plates with EFI.
- Wot?
- wide open throttle wire
- Dyno run with 150 shot 2009 Dodge Challenger SRT8
- Zex fuel pressure safety switch?
- THANK YOU ZEX. My first ever nitrous run
- HP change when upgrading to perimeter plate
- WOT will not activate everytime
- What RWHP can be expected with a 125 shot
- Can someone tell me which system this is (pic inside)
- Hemi Ram Kit 82176
- Zex on Cherokee SRT8 problem
- Need some help (Photos enclosed)
- Are jets universal?
- ZEX blackout delivered with too short nitrous line
- Problem with zex plate upgrade on bigshot system
- running a longer nitrous line for softer hit
- Zex wet system
- zex nitrous wet 82021 w/o bottle
- #82021
- TC Window Switch/Jetting/HPFP Question
- zex nitrous?
- Zex Questions
- New ZEX Nitrous Video
- Nitrous Management Unit will not program
- Bottle Heater Voltage Problem
- ZEX 82011 Questions
- Zex sparkplugs to fit my motorcycle.
- Zex Perimeter Plate Jetting
- Zex Blackout Dual Perimeter Plate Install
- Rebuilding a purge solenoid
- Nitrous question
- Booster Fuel Pump Kit
- EFI Perimeter Plate Questions
- Zex Kit #82314 Honda Fit
- Intake Fitting
- Dry Shot Zex
- torque converter shred
- #82011 Kit in a 09 Challenger
- zex box nmu
- Running too rich with 55shot?
- Zex bottle heater
- Resistor rating
- Wire zex solenoid with msd rpm window switch
- NMU won't retrain after fuse blew
- Missed shift, Zex wet sys., acts like thottle stuck.
- ZEx shots are rated to flywheel!!!
- Power Point fuses blowing
- NMU Repair
- LT1 ZEX Dry Kit
- zex perimiter plate
- Zex Bottle Heater
- Fuel Pressure????
- Nitrous Management Unit - Ground Interrupt Okay?
- upgrading the 82047
- 2006 GMC 4.3 liter V.6 (elbow in intake)
- zex perimeter plate electrical issues
- Problem with Zex TC Window Switch part # 82085
- Problem with Zex TC Window Switch part # 82085
- ZEX Product wiring help
- zex dry kit