Aux Output Wiring

alsamson · #1 (**permalink**) 03-06-2010, 08:48 PM

I am installing my wiring harness for a FAST XFI. I want to use one of the aux outputs but there are no pins in the main ECU connectors for any of the aux outputs. What options do I have?

Thanks,
Al

TurboNova · #2 (**permalink**) 03-07-2010, 12:23 AM

Pins are available, you can simply crimp a pin to the wire you are going to use. Lift the lock on the connector and plug in the wire.

alsamson · #3 (**permalink**) 03-07-2010, 09:31 PM

Thanks, Brian. For those who might be interested, I searched the forum and found you can buy the pins themselves at Mouser Electronics. Part number is 175265. I would post a link but I'm still a rookie on the forum and not allowed to post links yet.

Fast makes an Option Harness - Switching Outputs that is P/N 301404

TurboNova · #4 (**permalink**) 03-08-2010, 03:16 PM

Remember there are two different sized pins too and you may need the de-pinning tool also.