Blackout Nitrous - The Dark Secret To Adding Horsepower

The ZEX™ Blackout Nitrous System™ is the newest edition to the ZEX™ Nitrous system product line. The black powder coating provides a sleek black look that accents the high-tech nitrous system that ZEX™ is known for. And when it comes to a product that can deliver extra horsepower, there is no equal.

The Blackout Nitrous System™ is unprecedented for looks, performance and power potential. Like all ZEX™ nitrous systems, the Blackout Nitrous System™ incorporates the most technically advanced performance features available, including the patented ZEX™ Active Fuel Control™. This feature automatically adjusts the nitrous fuel enrichment so your engine never runs too rich or too lean. In addition, the Blackout Nitrous System™ features a throttle-by-wire compatible electronic TPS switch for nitrous activation at wide open throttle. Power settings vary for each application-specific kit, and every unit comes with appropriate tuning jets, as well as fuel tap fittings, solenoids, filters & all necessary activation electronics. In addition, the Blackout Nitrous System™ is available for both Carbureted and EFI systems.

When it comes to delivering new power, there aren’t many easier and quicker ways to get up to 150 extra horsepower than bolting on a nitrous system for your car. And there is no better nitrous system made than a ZEX™ Nitrous System.

Installation of a ZEX™ nitrous system is straightforward and can be done within a four-hour time frame on average. Take a look at the video above as well as the photo sequence below to see how easy it is to get incredible power gains - fast and easy.

In this photo the nitrous bottle has been pre-assembled in the bottle brackets and placed in the trunk so the bolt holes may be marked.

Next, the holes are drilled.

The fuel line is routed into the trunk from underneath the car.

With the tank mounted and the nitrous supply line connected to the nitrous bottle, the nitrous supply line is routed under the car and into the engine compartment.

The next step is to mount the nitrous management unit. In this case it will be mounted on the outside of the air filter box.

The nitrous supply line is connected to the nitrous management unit.

Nozzle installation is the next step. The nozzle in this application is located between the mass air meter element and the throttle body.

After the nozzle is installed the intake is put in back in place. Then the nitrous jets are installed and the nitrous feed lines are connected.

There are three wires to be connected - the power wire is red, the ground wire is the black and the TPS activation wire is white.

The arming switch is installed inside the car. The switch is inserted into the power point plug (cigarette lighter).

The fuel line adapter is put in place and the nitrous feed line is connected.

Now you can hit the road and test out the newly added horsepower that comes from adding this ZEX™ Blackout Nitrous System™ to your car.

For more information on the full line of ZEX™ products go to www.zex.com or call ZEXTEK™ 1-888-817-1008.