Bottle Heater Voltage Problem

[BOOST INSIDE]

I have tried a couple different ways of trouble shooting this problem with nothing working.

I have a Zex nitrous bottle heater and when I flip the switch over it drops voltage down to 0 on the meter. With the switch off it gets the full 13.8-14 volts the meter is seeing, until it is switched on, it drops down to 0. I didn't have this problem the first time I was as the track.

I tried running a new wire directly from the battery to the switch (with the 30 amp fuse inline), but it still has the same voltage drop.

Any help would be appreciated.

Cory

[amick]

I am assuming your heater is actually not working? Could you tell me where you are putting your leads to test the voltage?