Classic FAST configurable firing order

[RSNovi]

We put a classic FAST on a SBF with a non-standard firing order. I went in and changed the firing order in the configuration parameters, but someone mentioned that the injector harness might need to be re-pinned. Is this true?

Chris

[FAST Tech Maxwell]

That is correct. The firing order in the software is only for labeling purposes for individual cylinder tuning.

The actual injector firing order must be done at the injector harness.

Remember cylinder #1 starts on injector output E

For a 351W
1-3-7-2-6-5-4-8 = E-F-G-H-A-B-C-D

[RSNovi]

That is correct. The firing order in the software is only for labeling purposes for individual cylinder tuning.

The actual injector firing order must be done at the injector harness.

Remember cylinder #1 starts on injector output E

For a 351W
1-3-7-2-6-5-4-8 = E-F-G-H-A-B-C-D

Thank you very much. This is very helpful.

Chris