constant pressure valvebody problem

[jerryd]

I had my 700r4 rebuilt and I installed the new valvebody . I now only have first and reverse. I rechecked the 2 and 4 servos. Everything appears to be in place. Just wondering what else it could be?

I had my 700r4 rebuilt and I installed the new valvebody . I now only have first and reverse. I rechecked the 2 and 4 servos. Everything appears to be in place. Just wondering what else it could be?

Jerry,
I would have to bet on that you have a check ball or valve body gasket issue, if everything in the trans is good. I would make sure you have the case side and valve body side gaskets on the right side and that you have the check balls in the correct spot. What valve body are you using?

[jerryd]

I pullled the 2 and 4 servo out again and checked the govenor . I put everything back . It started shifting like it should. Thanks for your help