DIfferance between MAP and MAF sensors, for ZEX DRY Nitrous?

bigufofoot · #1 (**permalink**) 09-03-2010, 12:44 AM

Product in question: 82011 Honda,Acura,Hyundai,Mitsubishi Dry Nitrous System...

Hi there I have a 2003 Honda accord V6... Looking to purchase a ZEX dry nitrous kit. I read somewhere that a MAF sensor is required but when I checked the sensor on my throttle body, it said MAP sensor... Will the ZEX nitrous be compatible?

amick · #2 (**permalink**) 09-03-2010, 12:07 PM

I would use our 82021 wet kit on that setup. If I am correct that engine does not have a vacuum operated fuel pressure regulator so our dry kit will not work.

bigufofoot · #3 (**permalink**) 09-03-2010, 06:07 PM

Cheers m8! Thank you for the advice

For the wet system.. you need a fuel line connection right? I cant seem to find the schrader valve on my accord... Any idea where that is? all i found was a valve called the EVAP... I do not think thats the right one tho...

amick · #4 (**permalink**) 09-08-2010, 02:28 PM

On that engine there is not a schrader valve and you will actually have to drill and tap the rail. Just any point on the rail that is a nice flat spot for you to tap into will work fine.