EFI Perimeter Plate Questions

[Stinger_Camaro]

Ok so first post on the forum, lets make it a good one. I've got a 1985 Camaro with a 383 ci engine in it running on 91 octane gas. All components are forged so they are up to handling the added pressure that will be caused from the oxidizing agents. I have been looking for a kit for my car and because the intake on it is an Accel Pro-Ram single plane carb style intake manifold BUT is fuel injected, I am wanting to put on a perimeter plate system. I have been trying to look through the catalog to find one but I can only SEEM to find a perimeter system for carb setups. Can those be used with a fuel injection setup?

The throttle body is a mono-blade 90mm Accufab unit to a 110 degree elbow that then attaches to the Pro-Ram. So the plate would be sandwiched between the 110 degree elbow and the intake manifold,

Thanks for any help,

Brett

[amick]

You can use a part number 82221. This is the EFI Perimeter Plate System. It will work on any standard square flange 4bbl intake and is tunable from 100-300hp.