fast rpm module msd prm cable

[krys]

ripped mine dont ask how want to fix it two wires out red and black which is for the tach signal or are both connected to one wire to the msd

help
krys

[FAST Tech Maxwell]

I also sent this in response to the email you sent in to Tech Support at FAST:

Where did you rip it?(picture maybe?) There is a resistor and a couple of diodes under the shrink tubing on the wire where it changes from black to red.

Normally the red end is what connects to the MSD box, and the black end plugs into the RPM module.

You can buy a whole new MSD input cable for $14.

Let me know if you have any questions.

[krys]

do you have a part number
thanks krys

[FAST Tech Maxwell]

Part# for MSD input cable is 170587.