LT1 ZEX Dry Kit

[katz_2003]

I have the LT1 dry kit as stated in the title. I am having problems. I just installed this not too long ago and finally got everything hooked up this weekend to test it out. For some reason I cant spray while the car is running. When I turn the key to the run position without starting I can hear it spraying and everything but then when I start the car up it will not spray. I have no idea what is going on and I really could use some help. I also put zex bottle warmer on my bottle and it turns on for like two seconds then turns off...I thought a bottle warmer was suppost to warm up the bottle not just turn on for acouple seconds and turn back off. I am not really too happy with my purchase so far. Hopefully someone can help me out with this.
Thanks
Tyler

[amick]

Tyler as far as your problem with the ZEX kit itself, where are you getting your power and and ground at for the kit. I am assuming you have already programed the box? Do you know what the bottle pressure is when you were trying to spray the kit. The bottle heater coming on and going off quickly may not be a problem at all. It is thermostat controlled to turn off when it sees a certain temperature. It will take a minimum of 15 minutes for the heater to acclomate itself to the bottle temp when you first put it on. Also if it is warm outside and the bottle has already reached that temperature then it will not kick on either. Or it may kick on and turn off quickly as you describe. If you would rather call in and speak with me direct my number is 901-795-2400 Ext 553. You can also e-mail me at amick@compcams.com