Originally Posted by overdriv |
I have a PowerGlide transmission that has the following parts in it. I hope someone can tell me something about them, and point me to the instructions.
On the valve body on the filter mount area; 22501V
The separator plate has this; PowerGlide B TCI
The input shaft has; TCI-11-21 and 772600 or 768600
Kind of hard to read as the markings are of poor quality.
Thanks!
|
overdriv,
Does the valve body have a spring behind the trans brake valve? As for the input shaft those numbers dont match anything we have however they are close to our 749600 which would be a turbo spline(30 teeth) 1.76(12-7/8" long) input shaft. If you check those measurements and the match that shaft then more than likely it is a 749600. Let me know on the valve body.
Thanks
Russ