Shaft rockers RHS 360cc heads

[BBCZack]

I am looking at geting shaft rockers for my 360cc RHS heads. Is there anyone on this forum running shaft rockers on these heads? I would like to get a 1 piece rocker stand if possible. The cam i am going to run is .860 intake .842 exhaust. 300lbs on the seat 900lbs open.

Any real world experience would be extreamly apreciated.

Zach

[BBCZack]

Reason for asking becasue it seems like on some of the rocker stands it is real thin by the port. Wanted to know if anyone has ripped out the mounting stand with these heads, using individual stand shaft rockers on big cam with a lot of spring pressure. Thats why i was aking if they make a one piece stand.

[amick]

I would recommend our 1520 part number to you. These are a 1 piece design and are made for these heads.

[BBCZack]

I would recommend our 1520 part number to you. These are a 1 piece design and are made for these heads.

Thanks for responding. Do you have a link or a picture of them setup on the heads?

Thanks

[amick]

I do not think I have one but I will check and see if I can find something for you.

[BBCZack]

I do not think I have one but I will check and see if I can find something for you.

Any luck on getting pictures.

[amick]

Not yet I haven't but I have not forgot you.

[BBCZack]

Hi its been 3 months now any pictures of shaft rockers on your product? I am looking into purchasing some, i have a picture of the T&D setup but they are bolted together not a true one piece stand.

[amick]

No sir I do not have a picture available at this time. Our marketing department is working on getting pictures taken of all of our products and they will be posted on www.cpgimages.com