TCI Powerglide Shield

[BLN355]

Hi,
I have just purchased a TCI Trans Shield to suit a Powerglide, i have just sat it on my spare glide casing to see how it fits, i just want to confirm if the right hand side of the shield is sitting correctly. The left side is easy as it bolts to the servo cover, i cannot get that wrong, that side the shield is also proud of the pan rail so the lower bracket will fit nice.

But over on the rhs, the shield appears to be possibly sitting to high and is also sitting inside the edge of the pan rail, from what i can see i will need to space the lower bracket out from the shield to stop it bending as it would pull in against the pan rail.

I have also attached a picture of how it is currently sitting, does the shield need to pulled away from the tranny and down lower, or do i have it right now ?

Thanks
Matt

Hi,
I have just purchased a TCI Trans Shield to suit a Powerglide, i have just sat it on my spare glide casing to see how it fits, i just want to confirm if the right hand side of the shield is sitting correctly. The left side is easy as it bolts to the servo cover, i cannot get that wrong, that side the shield is also proud of the pan rail so the lower bracket will fit nice.

But over on the rhs, the shield appears to be possibly sitting to high and is also sitting inside the edge of the pan rail, from what i can see i will need to space the lower bracket out from the shield to stop it bending as it would pull in against the pan rail.

I have also attached a picture of how it is currently sitting, does the shield need to pulled away from the tranny and down lower, or do i have it right now ?

Thanks
Matt

Matt,
If you can please give me a call with the date on the trans shield.

[BLN355]

December 2009

December 2009

It does sound like it was bent to far if you can ship it ATTN: Russ and i will get it swapped out for you.

Thanks