Welcome to CPGNation.com! Log in or Sign up to interact with the CPGNation community.

Cam ID

Discussion in 'GoParts Support Forum' started by paulh12, Mar 1, 2013.

  1. paulh12

    paulh12 New Member

    Joined:
    Mar 1, 2013
    I was giving a slightly used cam that I think is a Comp Cam. The only info I have for identifying this cam is some lettering in the cam spocket end of the cam that says the following; C6F S.
    I was told it has a 620 lift, and that's all I know. Any help in identifying this cam further would be greatly appreciated..Paul. Also I know it is a solid lifter roller cam. I have the solid lifters' with it. Thanks.
     
  2. CPG Marketing

    CPG Marketing Administrator Staff Member

    Joined:
    Apr 11, 2008
    Location:
    Southaven, MS
    Hi Paul,
    I wish we could be of more assistance but unfortunately that serial number is not from one of our camshafts and it doesn't ring a bell with us.
     
  3. maxwell

    maxwell Moderator Staff Member

    Joined:
    Jul 5, 2012
    Marketing is correct, Paul.

    All of our cams will have a serial # on them.

    It will look something like UH7345-12 or J 5732-09

    It starts with 1 or 2 letters of the alphabet, then 4 numbers, then a dash and the last 2 numbers denote the year it was made. -12 would be 2012, or -09 would be 2009.
     

Share This Page