Welcome to CPGNation.com! Log in or Sign up to interact with the CPGNation community.

FAST analog input harness XFI 2.0

Discussion in 'FAST Support Forum' started by 37jbrock, Jan 2, 2018.

  1. 37jbrock

    37jbrock New Member

    May 18, 2013
    Chicago far north suburbs
    I see that FAST has an oil press fuel press harness they make but I want to monitor blower boost press and ad 2 egt sensors 1 on each side of the motor plus fuel level and a trans temp sensor. I know I can get the press sensors from FAST would I have to use a FAST temp sensor and last I looked they do not sell individual thermocouples. Will the E DASH see these inputs or do I have to assign them if so how is this done. Thanks Jeff

Share This Page