Valve Timing at 0.006" and 0.050"

[Aerocoupe]

I am looking at two different cam cards and one shows the valve timing at 0.006" and the other shows the valve timing at 0.050". I have my assumptions on how to equivalate the two but wanted to ask here since I am pretty sure I will get the correct way to do it rather than assume. I can provide data from both cam cards but did not know if that would be necessary.

[amick]

If you can tell me the part number of the two cams I would be happy to provide the timing at .050 for both.

[Aerocoupe]

35-518-8. The other cam card shows the timing at 0.050.

Thanks,

Darren

[amick]

These specs are for cam installed at 108 int c/l due to it having 4 degrees advance built in.

Int opens 4 btdc int closes 40 abdc

exh opens 52 bbdc exh closes 0 atdc

[Aerocoupe]

Thanks!

Darren

[amick]

No problem at all.