XFI AMP connectors

[94GT427]

I believe the attached are the correct part numbers for the XFI plugs (connector that plugs into ECU) and what Tyco-AMP refer to as connectors (terminals inside plug). If you use the link below, you can search the part number (listed in the 3rd image) and it will add the "-1" or "-6" extension. The images also list AWG size and the small (.040) or large (.070) connector type. Hope this helps.


http://www.tycoelectronics.com/catalog/bin/TE.Connect?C=1&M=SYN&BML=&SID=170718&LG=1&PID=108707&RQS=C~1^M~BYPN^TCPN~179679-6^RQPN~179679-6

Please correct me if I'm wrong

[efipaul]

That's good info to have. I found all of the Delphi connectors online as well, and ended up ordering most of them from Mouser, but these are the ones I couldn't find.

[TurboNova]

I also have all of the connectors for a Fast harness both weather pak, metri pak and AMP. Pins, seals and shells.

I always have everything in stock to build your own custom harness becasue I use them for my harnesses.

shipping usually is more than a single connector or pins.