Zex fuel pressure safety switch?

fast76furious · #1 (**permalink**) 04-19-2010, 04:42 PM

Hi I just got the 82023 wet kit for my mustang, do i have to install a fuel pressure safety switch or is it part of the nitrous management unit?

Thx.

amick · #2 (**permalink**) 04-19-2010, 06:31 PM

The NMU will not monitor fuel pressure so if you want that safety feature you will have to run a fuel safety switch.

fast76furious · #3 (**permalink**) 04-20-2010, 11:00 AM

one more thing i have a 3.8l V6 mustang, would it be ok to use the 8 CYL fuel jets that came with the kit, or should i get the 6 CYL ones?

Thx.

amick · #4 (**permalink**) 04-20-2010, 01:21 PM

The jets themselves are the same but the jet numbers you will use for a certain HP shot will change. The jet chart is available on the website for which jets you need for the different HP ratings on a 6cyl with a wet kit. I have provided a link below to the jet chart.

http://www.zex.com/Pages/71/Jet%20Charts.aspx